Paradox Digiplex DGP-610 User Manual page 8

2.3.1 Normal Mode
When no actions are being performed on the keypad, the keypad will remain in
Normal Mode. In Normal mode the LED keypad will illuminate:
• The "AC" Light if power is present
• The Numerical Symbols representing any open zones
• The Area Symbols if any areas are armed
• The [ ] Symbol if any alarms have occurred
MEM
• The [ ] Symbol if any troubles are occurring
TRBL
• The [ ] Symbol if zones are bypassed
BYP
and show the status of the "Status" Light (see Figure 2-1,page 7)
2.3.2 Confidential Mode
The installer can program the keypads not to display the status of your system
automatically by changing the LED keypad from Normal Mode to Confidential
Mode. In Confidential Mode all the Symbols and Keypad Indicator Lights are
extinguished. Depending on how your keypad was programmed by the
installer, you must either press a button or enter your User Access Code to
activate Normal Mode.
2.3.3 Multiple-action
If your installer has enabled this feature, the LED Keypad will permit you to
complete more than one action without having to re-enter your User
Access Code. Press the button to exit the User Menu.
Digiplex LED Keypads 9