Access Codes; Keypad Lock-Out; Erasing Access Codes; System Master Code - Paradox Digiplex DGP-610 User Manual

5.0 ACCESS CODES

Access Codes are codes that will allow you and others to access the
system. These codes can be programmed to permit access to all or some
features and areas. The installer will program User Access Codes to be
four digits, six digits, or variable from one to six digits in length. Each digit
can be any value between zero and nine. If the installer programmed your
system to accept a variable code length, you may have to press the
button after entering their User Access Code. Only the System Master
Code cannot be less than 4 digits.
5.1
KEYPAD LOCK
If a consecutive number of invalid codes are entered on the keypad, the
installer can program the system to lock-out access from the keypad for a
specified period of time.
5.2 E
RASING
To delete existing Access Codes, press the
7 in "How do I program Access Codes" starting on page 27. Once the
information is erased, press the
5.3 S M
YSTEM
The System Master Code will give you access to all the features as well as
the ability to add, modify, or delete any User Access Codes. We suggest
-
OUT
A
CCESS CODES
C
ASTER ODE
button to save and exit.
(default 123456)
button in steps 5, 6, and
Digiplex LED Keypads 25