Area Status Display - Paradox Digiplex DGP-610 User Manual

2.5 A S
REA TATUS
In Area Status Display you will be able to see the status of the individual
areas in a Partitioned System (see section 2.4).
How do I see the status of the zones?
1) Enter your [
2) Press the numbered button corresponding to the desired area:
= Area 1
= Area 2
3) The keypad will emit a Confirmation Beep and will remain that Area's
status for two minutes then return to Normal or Confidential Mode. You
can perform the next desired action from Area Status Display.
In Area Status Display the following will illuminate for the area selected:
• The Area Symbol (A1, A2, A3, and A4) if the area is armed. For example,
if you press
• The Numerical Symbols representing any open zones. For example, if
zone 6 was open, then the Numerical Symbol [6] would illuminate.
•The [ ] Symbol if any alarms have occurred
MEM
•The [ ] Symbol if any troubles are occurring
TRBL
•The [ ] Symbol if the area is Stay or Instant Armed
STAY
•The [ ] Symbol if the area is Force Armed
FORCE
•The [ ] Symbol if zones are bypassed
BYP
•The state of the "Status" Light
D
ISPLAY
]
ACCESS CODE
, and Area 3 is armed, [A3] will illuminate.
= Area 3
= Area 4
Digiplex LED Keypads 11