4.0 Arming & Disarming
Take full advantage of your Spectra system by familiarizing
yourself with all the arming methods.
If your system is not partitioned (see page 9), the
system considers everything as belonging to
Partition 1
4.1 Exit Delay
After entering a valid arming sequence, an Exit Delay
Timer will provide you with enough time to exit the
protected area before the system arms. The
flash during the Exit Delay and the keypad may beep.
During the final 10 seconds, the beeping and the light will
accelerate.
4.2 Disarming & Deactivating an Alarm
To disarm an armed system or a system in alarm, enter
your access code. An entry point (i.e. front door) will be
programmed with one of two Entry Delay Timers. When an
entry point is opened, your alarm system will not generate
an alarm until this timer elapses. Any user can disarm a
partition that they have been assigned to, except users
assigned with the Arm Only Option. To disarm alarms
generated by a Delayed Fire Zone, please refer to page 26.
.
How do I deactivate an alarm?
Enter your [
ACCESS CODE
].
READY
Spectra LED Keypads 13
light will