Table of Contents
Advertisement
To enable Idle Mode:
1. Press and hold the
is running.
• Pressing
LOCK
• Pressing
START
2. The parking lights will come
3. Remove the ignition key, exit the vehicle and lock the doors.
The engine will go on running. It will shut down when the pre-programmed run time expires.
Caution: Do not leave children or pets unattended in a car running in Idle Mode.
Note: When enabling Idle Mode, pressing
entry is installed).
Valet Mode
The system can be placed in Valet Mode to disable the remote starting capabilities. If the
vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine
from being accidentally started by remote control.
To put the system i n t o Valet Mode:
1. Turn the ignition key to the
2. Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will turn
remain lit.
To take the system o u t o f Valet Mode:
1. Turn the ignition key to the
2. Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will go
The valet button can only be used if the ignition key is in the
Ignition Valet
This feature allows the user to enter Valet Mode by using only the Ignition key.
To ENTER Valet Mode
1. With the key in the Ignition switch, turn the key to the
5 times within 10 seconds.
2. The Parking Light output from the Module will activate and flash 3 times indicating the
Module is now in Valet Mode. The LED will turn
To EXIT Valet Mode
1. With the key in the Ignition switch, turn the key to the
5 times within 10 seconds.
2. The Parking Light output from the Module will activate and flash twice indicating the Module
is now out of Valet Mode. The LED will turn
"Home Valet"
TM
Mode
This safety feature will remotely place the vehicle into a no-remote-start mode: if the vehicle is
parked indoors there is no danger it will start accidentally by remote control or external trigger.
To E N T E R Home Valet Mode:
1. Press the
or
LOCK
2. Within 3 sec. press the
To E X I T Home Valet Mode, turn the ignition key to the Ignition On (Run) position.
Note: Once Home Valet is activated, the vehicle will not start by remote control or external
trigger until the ignition key is turned to the
P. 4
,
or
LOCK
UNLOCK
START
or
will unlock the doors.
UNLOCK
will leave the doors unaffected.
.
ON
(
IGNITION ON
(
IGNITION ON
button and,
UNLOCK
button until the parking lights turn
STOP
button on your remote transmitter while the engine
or
will unlock the doors (if keyless
LOCK
UNLOCK
) position.
RUN
) position.
RUN
IGNITION ON
ON (RUN/IGNITION)
solid.
ON
ON (RUN/IGNITION)
.
OFF
(
) position.
IGNITION ON
RUN
(
) position.
RUN
and then
and then
and remain lit for 3 sec.
ON
User Guide AS-1525 SH
and
ON
.
OFF
positions
OFF
positions
OFF
Advertisement
Table of Contents
