Safe Start; Installer-Programmable Valet Mode; Home Valet™" Mode; Turbo Mode - Autostart AS-3372TW-FM User Manual

Hide thumbs Also See for AS-3372TW-FM:
Table of Contents

Advertisement

Safe Start

If this feature is enabled, the user must press the
remote-start the vehicle. This will eliminate accidental remote starts, e.g. when children are playing
with the transmitter.
• To remote-start your vehicle if Swap Start Mode is selected, press
• The
output can be activated by pressing the
AUX 2

Installer-Programmable Valet Mode

"Home Valet™" Mode
If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle
is parked indoors, there is no danger of it starting accidentally by remote control.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote but the
OEM alarm functions will still be enabled.
To take the system i n t o Home Valet Mode:
• Press the
or
LOCK
• Within 3 seconds, press the
The transmitter will beep twice.
• Release the
START/STOP
The
and
START/STOP
seconds.
To take the system o u t o f Home Valet Mode:
• Turn the ignition key to the
The system will warn you if someone attempts to start your vehicle while it stands in Home Valet
Mode:
• The transmitter will beep twice.
• The
and
START/STOP
• The parking lights will:
Turn
then
ON
Flash twice, pause; then
Flash twice again.

Turbo Mode

If Turbo Mode is configured at installation, it will allow a turbocharger to idle down after the user
leaves the vehicle: the unit will take over the vehicle and keep it running for 60 seconds (or until it
is shut down by remote control), then shut down the engine.
If the vehicle has an automatic transmission, proceed as follows to set the system to Turbo
Mode:
1)
With the engine running, make sure to release the brake pedal and press the
button on the transmitter until the parking lights come
START/STOP
2)
Remove the ignition key from the ignition switch.
The engine will continue running.
3)
Exit the vehicle and close all doors, hood and trunk.
4)
Press the
TRUNK
configured|) and confirm that the vehicle is in Turbo Mode.
5)
The engine will shut down after 60 seconds.
If the vehicle has a manual transmission, follow all steps of the Ready Mode routine (see
"Ready Mode Option" in this Guide) to activate Turbo Mode. At the last step, press either:
1)
to lock the doors and have the engine shut down after 60 seconds;
LOCK
The parking lights will flash 3 times and remain lit.
The OEM-style alarm and starter kill (if configured) will be armed.
P. 10
button.
UNLOCK
START/STOP
and
buttons.
LOCK
buttons will flash twice and the parking lights will come
LOCK
IGNITION ON (RUN)
buttons will flash twice.
LOCK
; then
OFF
button; this will lock the doors, arm the OEM-style alarm (if
START/STOP
START/STOP
and
buttons simultaneously.
LOCK
position.
button twice within 3 seconds to
and then
AUX
button.
LOCK, UNLOCK
.
ON
.
LOCK
for 2
ON
or
User Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nah3503

Table of Contents