Slimline Optical Drive Option - HP ProLiant DL G6 User Manual

Power up the server (on page 22,
20.

Slimline optical drive option

To install the component:
Power down the server (on page 22).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 25).
3.
Remove fan 5 (on page 26).
4.
If installed, remove the BBWC battery pack or the FBWC capacitor pack (on page 27).
5.
Remove the air baffle (on page 28).
6.
Remove the fan cage (on page 29).
7.
Remove the optical drive blank.
8.
"Powering up and configuring the
("Open or remove the tower
server" on page 40).
bezel" on page 22).
Hardware options installation 76