Optical Drive Option - HP ProLiant DL160 Gen8 User Manual

Optical drive option

This server supports the installation of a SATA DVD-ROM optical drive or a SATA DVD-RW optical drive.
To install the component:
Power down the server (on page 16).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 17).
o
Remove the server from the rack (on page 16).
o
Remove the access panel (on page 19).
4.
Remove the processor air baffle (on page 20).
5.
Remove the PCI riser cage (on page 21).
6.
WARNING:
internal system components to cool before touching them.
Remove the optical drive blank:
7.
LFF configuration
o
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Hardware options installation 42