Installing A Slim Optical Disk Drive Option - HP ProLiant ML30 Gen9 User Manual

9. Install the access panel.
10. Install the bezel.
11. Return the server to an upright position.
12. Connect the power cord to the power source and the server.
13. Power up the server.

Installing a slim optical disk drive option

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Procedure
1. Power down the server.
2. Disconnect the power cord from the power source and the server.
3. Remove the bezel.
4. Place the server on its side with the access panel facing up.
5. Remove the access panel.
6. Remove the air baffle.
7. Remove the media drive bay blank.
8. Remove the EMI shield.
28 Installing a slim optical disk drive option