Redundant Hot-Plug Power Supply Option - HP ProLiant ML370 G5 User Manual

Redundant hot-plug power supply option

The server supports a second hot-plug power supply to provide redundant power to the system in the
event of a failure in the primary power supply.
CAUTION: If only one power supply is installed, do not remove the power supply unless the server has
been powered down. Removing the only operational power supply will cause an immediate power loss.
To install the component:
Access the rear panel.
1.
Remove the power supply blank.
2.
Install the second hot-plug power supply.
3.
Connect the power cord to the redundant power supply.
4.
Hardware options installation 58