Canon 2235B001AA Reference Manual page 250

Before Using the
Machine 1
Printing Reports Automatically
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
TX REPORT, RX REPORT, and ACTIVITY REPORT can be set to
print automatically.
TX REPORT
The default setting is <PRINT ERROR ONLY>.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <REPORT
SETTINGS>, then press [OK].
3.
Press [ ] or [ ] to select <SETTINGS>, then
press [OK].
4.
Press [ ] or [ ] to select <TX REPORT>, then
press [OK].
5.
Press [ ] or [ ] to select the setting you
want, then press [OK].
<PRINT ERROR ONLY>: Prints a report only when a transmission error
occurs.
<OUTPUT NO>: Does not print a report.
<OUTPUT YES>: Prints a report every time you send a document.
6.
Press [Stop/Reset] to return to the standby
mode.
Back Previous
Report Items
The following items are displayed in the Transmission Report:
JOB NO.: Job number
MODE: Mode of transaction (G3 or ECM)
NO.: Sequence number
DESTINATION TEL/ID: Name and number of recipient
START TIME: Date and time of transaction
PAGE: Number of pages sent
RESULT: Result of transaction
– OK: Transmission successful
– NG: Transmission failed
– STOP: Transmission manually canceled before completion
– NO ANSWER: Call not answered
– PAPER JAM: ADF jam occurs during Manual TX
Error code: For descriptions of error codes, see "Error Codes,"
on p. 10-20.
TOP
Next
11-27