Canon 2235B001AA Reference Manual page 210

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Received faxes print blotched or unevenly.
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the toner cartridge installed properly?
A Make sure the toner cartridge is installed properly.
(See "Set Up the Machine, " in the Starter Guide.)
Q Is the cartridge out of toner?
A Replace the toner cartridge. (See "Replacing the Toner
Cartridge, " on p. 9-11.)
Q Is the correct size of paper loaded in the machine?
A Make sure you load paper that meets the
requirements for use. (See "Paper Requirements, " on
p. 2-7.)
A Change <PAPER SETTINGS>. (See "Setting Paper Size
and Type, " on p. 2-13.)
Q Is the sender's machine functioning properly?
A Ask the sender to check that the scanning
components of the machine are clean.
Back
Q Is the toner low or unevenly distributed?
A Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge. (See
"Replacing the Toner Cartridge, " p. 9-11.)
Part of the document you receive is cut off.
Q Are the slide guides of the paper cassette set to
the size of the paper?
A Adjust the guides of the paper cassette to the size of
the paper.
Have you specified the correct paper size for the
Q
paper cassette?
A Specify the correct paper size for the paper cassette.
TOP
Previous Next
10-34