Storing/Editing Recipients For Group Dialing - Canon 2235B001AA Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
6.
Press and hold [Clear] to delete the entire entry,
then press [OK].
If you delete the fax/telephone number, the registered name is
cleared automatically.
7.
Press [Stop/Reset] to return to the standby
mode.
Storing/Editing Recipients for Group
Dialing
The recipients must be registered in one-touch speed dialing keys or coded
speed dialing codes beforehand.
Registering Recipients for Group Dialing
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3.
Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
Back Previous
4.
Press [ ] or [ ] to select an empty one-touch
speed dialing key that you want to set as the
group dialing, then press [OK].
You can also select a one-touch speed dialing key by pressing the
corresponding one-touch speed dialing key.
5.
Enter the group name (max. 20 letters, including
spaces) with the numeric keys, then press [OK].
To register another group, repeat the procedure from step 4.
Ex.
N A M E
C a n o n G r o u p
6.
Select the recipients you want to register in the
group (max. 50 recipients) until all recipients are
registered, then press [OK].
To enter a recipient stored under a one-touch speed dialing key,
press the desired one-touch speed dialing key.
To enter a recipient stored under a coded speed dialing code, press
[Coded Dial], then enter the two-digit code with the numeric keys.
For multiple entries, press [Coded Dial] between each entry.
You can review the recipients which have been already entered with
[ ] or [ ].
TOP
Next
[ A ]
4-9