Machine Connection Method (Lpd/Raw) - Canon 2235B001AA Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
5.
Press [ ] or [ ] to select <LPD PRINT>, then
press [OK].
6.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses LPD as the print application.
<OFF>: Does not use LPD.
7.
Press [ ] or [ ] to select <TCP/IP SETTINGS>,
then press [OK].
8.
Press [ ] or [ ] to select <RAW PRINT>, then
press [OK].
9.
Press [ ] or [ ] to select <ON> or <OFF>,
then press [OK].
<ON>: Uses Raw as the print application.
<OFF>: Does not use Raw.
10.
Press [Stop/Reset] to return to the standby
mode, then restart the machine.
Back Previous

Machine Connection Method (LPD/Raw)

Connecting to a TCP/IP Network:
All computers that use the machine must have TCP/IP client
software installed and must be enabled for TCP/IP network use. For
details, see the manuals provided with the operating system.
Installing the Printer Driver and Specifying the Machine
Destination Setting:
To print from a computer, you must install a printer driver and
specify a setting for the machine destination. The machine
destination setting differs depending on the print application used
for printing. Use the following information as a guide to determine
the print application you are using, and then perform the necessary
operations.
– LPD: This is the print application generally used with TCP/IP.
– Raw: This is a print application used with Windows 2000/XP/
Server 2003/Vista. It can print at higher speeds than LPD.
In the following procedures, items displayed on the screen for Windows XP
are used; items might differ depending on your operating system.
TOP
Next
6-11