Before Using the
Machine
1
Document and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press [
] or [
] to select <RX SETTINGS>,
then press [OK].
4.
Press [
] or [
] to select <REMOTE RX>, then
press [OK].
5.
Press [
] or [
] to select <ON>, then press
[OK].
6.
Use the numeric keys to enter a new remote
reception ID (a combination of two characters
using 0 to 9), then press [OK].
7.
Press [Stop/Reset] to return to the standby
mode.
Back
Previous
Receiving a Fax Remotely
1.
When you receive a call, pick up the external
telephone.
2.
Use the numeric keys to enter the two-digit
remote reception ID to start reception.
If the machine is set for pulse dialing, press [Tone] to switch to tone
dialing before pressing the remote reception ID.
3.
When the reception is complete, hang up the
telephone.
TOP
Next
4-31