System Manager Settings; Document And Paper 2; Selecting The Receive Mode For Printing; Reception Restriction - Canon 2235B001AA Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Selecting the Receive Mode for Printing

You can select whether the machine stores all received pages in
the memory before printing them out or prints each page as it is
received.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <RX PRINT>, then
press [OK].
5.
Press [ ] or [ ] to select desired printing
method, then press [OK].
<MEMORY RX>: Prints after all the pages of the document are
received.
<PRINT RX>: Prints each page as it is received.
6.
Press [Stop/Reset] to return to the standby
mode.
Back Previous

Reception Restriction

You can reject incoming faxes from the senders who do not
transmit their fax numbers to your machine.
The default setting is <OFF>.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4.
Press [ ] or [ ] to select <RX RESTRICTION>,
then press [OK].
5.
Press [ ] or [ ] to select <ON>, then press
[OK].
6.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-32