Sending And; Sending And Receiving; Receiving; Remote Ui - Canon 2235B001AA Reference Manual

Before Using the
Machine 1
Document and Paper
2
Copying
3

Sending and

Receiving

4
Printing and
Scanning
5
Network
6

Remote UI

7

System Manager

Settings

8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index

Manual Reception

When you select <MANUAL> in <RX MODE>, follow the procedure
below to receive a fax.
1.
When the telephone rings, pick up the optional
handset or the external telephone.
2.
Press [FAX].
3.
Confirm that the modem's connecting sound is
heard, then press [Start].
4.
Hang up the optional handset or the external
telephone.
Back Previous

Memory Reception

The machine automatically receives faxes in memory when printing
is disabled under certain conditions (e.g., toner or paper has run
out).
Load paper and press [OK] to start printing faxes stored in memory.
For toner empty, the machine automatically starts printing when
the error is cleared.
– The machine memory can store up to 256 fax jobs or approximately 256
pages.*
* Based on the condition that the other party sends the fax by the
imageCLASS MF4270 with ITU-T Standard Chart No. 1, standard mode.
The maximum number of pages that the machine's memory can store
differs depending on the other party's machine.
– Once the pages are printed, they are deleted from the memory.
– If the memory becomes full, you will not be able to receive the remaining
pages. Contact the other party and ask them to resend the remaining
pages of the fax.
TOP
Next
4-28