Canon 2235B001AA Reference Manual page 211

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Cannot receive using Error Correction Mode (ECM).
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the toner low or unevenly distributed?
A Redistribute the toner inside the toner cartridge. If
the problem persists, replace the toner cartridge. (See
"Replacing the Toner Cartridge, " on p. 9-11.)
Q Is the printing method for received documents set
to <CUT>?
A If you want to print a received document without
cutting off the end, set the printing method to <ON>
or <OFF>. (See "Received Image Reduction, " on
p. 4-33.)
Q Does the sender's machine support ECM?
A If the sender's machine does not support ECM, the
document is received in normal mode without error
checking.
Back
Receiving of documents is too slow.
Q Is the resolution of the sender's machine set
higher?
A Contact to the sender and make sure the resolution of
the sender's machine has been set properly.
You cannot get documents from information services.
Q Is your machine set to the tone dialing type of the
telephone line?
A Press [Tone] to set the tone dialing.
Q Do you receive messages from the information
services such as to press [Start] after the beep to
receive?
A When you hear the beep sound, press [Start].
TOP
Previous Next
10-35