Canon 2235B001AA Reference Manual page 206

Before Using the
Machine 1
Faxes sent from the machine are spotted or dirty.
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
The documents you sent are too light.
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the recipient's machine working properly?
A Check the machine by making a copy. If the copy is
clear, the problem may be in the recipient's machine.
If the copy is spotted or dirty, clean the scanner
components. (See "Scanning Area, " on p. 2-3.)
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
"Loading Documents, " on p. 2-4.)
Q Is the density setting changed to be lighter?
A Adjust the density for light documents to be darker.
(See "Density, " on p. 4-5.)
Q Are the scanning components of the machine
clean?
A If the received document is spotted or dirty, clean the
scanning components. (See "Scanning area, " on p. 9-8.)
Back
Sending of documents is too slow.
Q Is the resolution set to <FINE>, <PHOTO> or
<SUPER FINE>?
A Setting the resolution to <STANDARD> reduces the
sending time.
Errors occur frequently while sending.
Q Are the telephone lines in poor condition, or do
you have a bad connection?
A Check if there is a device nearby that interferes with
signal transmission (e.g., microwave oven).
Cannot redial with [Redial/Pause].
Q Is <RESTRICT REDIAL> set to <ON>?
A When <RESTRICT REDIAL> is set to <ON>, Redialing is
not available. (See "Restricting Redial, " on p. 8-4.)
TOP
Previous Next
10-30