Before Using the
Machine
1
Basic Receiving Method
Document and Paper
2
Copying
3
Sending and
Receiving
4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Follow this procedure to set the machine for receiving faxes.
The default setting is <FaxOnly>.
Any data stored in the memory, including received fax documents, will be
deleted if you turn off the main power switch of the machine.
1.
Press [Additional Functions].
2.
Press [
] or [
] to select <FAX SETTINGS>,
then press [OK].
3.
Press [
] or [
] to select <RX MODE>, then
press [OK].
Back
Previous
4.
Press [
] or [
] to select the receive mode,
then press [OK].
< FaxOnly>: Answers all calls as faxes.
< AnsMode>: Receives faxes automatically and records voice
messages.
< NET SWITCH>: Distinguishes between fax and voice calls.
<FaxTel>: Switches between fax and voice calls automatically if
the optional handset or an external telephone is connected to the
machine. For optional settings, see "FaxTel: Optional Settings, " on
p. 4-26.
<MANUAL>: Does not answer any calls. You have to manually receive
faxes. See "Manual Reception, " on p. 4-28.
–
For <FaxTel> or <MANUAL>, make sure the optional handset or
an external telephone is connected to the machine.
–
For <AnsMode>, make sure an external telephone with built in
answering machine is connected to the machine.
–
The <NET SWITCH> mode is available for certain countries only
and requires subscription to a network switch service.
5.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-25