Canon 2235B001AA Reference Manual page 126

Before Using the
Machine 1
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Port Number Settings
Depending on your network environment, you can change the port
number for each protocol.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
3.
Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4.
Press [ ] or [ ] to select <TCP/IP SETTINGS>,
then press [OK].
5.
Press [ ] or [ ] to select <PORT NO. SET.>,
then press [OK].
6.
Press [ ] or [ ] to select the protocol of
which you want to change the port number
(LPD, RAW, HTTP, or SNMP), then press [OK].
Back Previous
7.
Use the numeric keys to enter the port number,
then press [OK].
8.
Press [Stop/Reset] to return to the standby
mode.
9.
Restart the machine.
TOP
Next
6-16