Process Drive Unit/Fuser Drive Gear Z25 - Brother DCP-L8400CDN Service Manual

9.49 Process Drive Unit/Fuser Drive Gear Z25

(1) Release all the wiring from the Wireless LAN cable rack.
(2) Release the three Hooks and remove the Wireless LAN cable rack from the Main body.
Wireless LAN cable rack
<Left side>
(3) Release the wiring of the Polygon motor harness.
(4) Remove the two Taptite cup S M3x8 SR screws and remove the Side ground plate L from
the Main body.
Main body
Taptite cup S
M3x8 SR
Side ground
plate L
Taptite cup S M3x8 SR
Hook
Fig. 3-198
<Left side>
Fig. 3-199
3-144
Hook
Main body
Polygon motor harness
Confidential