Server Locks - Lenovo ThinkServer TS430 User Manual

6 7 Ethernet connectors
Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.
Notes:
• The Ethernet connector 2 (callout
remote management functions, you need to connect an Ethernet cable to the Ethernet connector 2.
• The Ethernet connector 2 (callout
Control Protocol (LACP) teaming including NIC failover capabilities. If the teaming function is enabled,
the TMM management capability will be disabled.
Note:
Ethernet status LED
1
Left
2
Right
8 Front door key
Used to open or lock the front door.
Note: Carefully save the front door key to avoid loss.

Server locks

Locking the server cover helps prevent unauthorized access to the inside of your server and locking the front
door helps prevent unauthorized access to the installed hard disk drives.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
22
ThinkServer TS430 User Guide
7 ) marked with "MGMT" is for system management. If you want to use
7 ) marked with "MGMT" does not support the Link Aggregation
Color
Green On
None Off
Green Blinking
Amber On
Green On
None Off
Status
The server is connected to a LAN.
The server is disconnected from a LAN.
The LAN is connected and active.
The connection speed is 1000 Mbps
(megabits per second).
The connection speed is 100 Mbps.
The connection speed is 10 Mbps.
Description