Lenovo ThinkServer TS430 User Manual page 121

Machine type: 0387, 0388, 0389, 0390, 0391, 0392, 0393 and 0441
Hide thumbs Also See for ThinkServer TS430:
Table of Contents

Advertisement

Note: Carefully handle the ThinkServer RAID 700 Adapter by its edges and place it on a flat, clean,
and static-protective surface after you remove it.
7. Touch the static-protective package that contains the TR 700 Battery to any unpainted surface on the
outside of the server. Then, take the TR 700 Battery out of the package.
8. Position the TR 700 Battery above the ThinkServer RAID 700 Adapter so that the board-to-board
connector
1
on the bottom of the TR 700 Battery is aligned with the connector
RAID 700 Adapter; and the three mounting studs on the bottom of the TR 700 Battery are aligned with
the corresponding holes in the ThinkServer RAID 700 Adapter. Carefully press the TR 700 Battery onto
the ThinkServer RAID 700 Adapter until the two connectors (
three screws that come with the TR 700 Battery option kit to secure the TR 700 Battery in place.
Notes:
• Center the screwdriver when you install the screws and do not over-tighten the screws to avoid
possible damage to any parts.
• Do not touch the board on the bottom of the TR 700 Battery.
Figure 51. Installing the TR 700 Battery onto the ThinkServer RAID 700 Adapter
9. Install the ThinkServer RAID 700 Adapter with the TR 700 Battery. See "Installing or removing the
RAID card" on page 103.
10. Reinstall the PCI card bracket assembly. See "Removing and reinstalling the PCI card bracket
assembly" on page 91.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to "Completing the parts replacement" on page 170.
Removing the TR 700 Battery
Attention: Do not open your server or attempt any repair before reading and understanding the "Safety information"
on page iii and "Guidelines" on page 85.
This topic provides instructions about how to remove the TR 700 Battery if a ThinkServer RAID 700 Adapter
with a TR 700 Battery option is installed on your server.
1
and
2
) are firmly joined. Then, install the
.
Chapter 6
Installing, removing, or replacing hardware
2
on the ThinkServer
109

Advertisement

Table of Contents
loading

Table of Contents