Server Management Menu - Lenovo ThinkServer TS430 User Manual

Security menu items
Menu item
Set Administrator Password
Set User Password
TPM Support
TPM State
Pending Operation

Server Management menu

This topic provides information about the features available on the Server Management menu in the
Setup Utility program.
You can view system information and view or change event log settings on the Server Management menu.
The following table shows the contents of the Server Management menu. On each submenu, press the
Enter key to view the information or show selectable options and select a desired option by using up and
down arrow keys. Some items are displayed on the menu only if the server supports the corresponding
features.
Note: Default values are in boldface in the Selections column.
Selections
• Disabled
• Enabled
• Disabled
• Enabled
• None
• Enable Take Ownership
• Disable Take Ownership
Comments
Set an administrator password
to protect against unauthorized
access to your server. See "Using
passwords" on page 67.
Set a user password to protect
against unauthorized access to your
server. See "Using passwords" on
page 67. This item is only available
after you have set an administrator
password.
Enable or disable the TPM support.
To use the TPM feature, you need to
have a TPM module installed in the
TPM connector on the system board.
This item is displayed when the TPM
Support is set to Enabled. Set TPM
State to enable or disable the TPM
function. The server will restart to
change the TPM state.
Configure the TPM operation. To use
the TPM feature, you need to have
a TPM module installed in the TPM
connector on the system board.
.
Chapter 5 Configuring the server
63