Lenovo ThinkServer TS430 User Manual page 150

Machine type: 0387, 0388, 0389, 0390, 0391, 0392, 0393 and 0441
Hide thumbs Also See for ThinkServer TS430:
Table of Contents

Advertisement

3. The non-hot-swap hard disk drive(s) are installed in the lower hard disk drive cage and are protected
by an EMI-protective panel. Press the small tab
then pivot the EMI-protective panel upward to remove it from the chassis and gain access to the
non-hot-swap hard disk drive bays.
Figure 75. Removing the EMI-protective panel
4. Remove the server cover. See "Removing the server cover" on page 87.
5. Remove the front system fan 1. See "Replacing the front system fan" on page 157.
6. Locate the appropriate non-hot-swap hard disk drive bay. See "Server components" on page 25.
7. Touch the static-protective package that contains the new non-hot-swap hard disk drive to any
unpainted surface on the outside of the server. Then, take the new non-hot-swap hard disk drive and
the signal cable out of the package.
Note: Do not touch the circuit board on the hard disk drive.
138
ThinkServer TS430 User Guide
1
on the EMI-protective panel from the bottom and
2
1
U
U
C P
C P
M
M
M E
M E
U
U
P S
P S

Advertisement

Table of Contents
loading

Table of Contents