Kyocera FS C5020N - Color LED Printer Service Manual page 67

Service manual
Hide thumbs Also See for FS C5020N - Color LED Printer:
Table of Contents

Advertisement

Code
7002
Toner motor 2 overcurrent detection
error (cyan toner)
• The engine controller PWB (A0004)
detected the overcurrent of toner
motor 2.
7003
Toner motor 1 overcurrent detection
error (magenta toner)
• The engine controller PWB (A0004)
detected the overcurrent of toner
motor 1.
7004
Toner motor 3 overcurrent detection
error (yellow toner)
• The engine controller PWB (A0004)
detected the overcurrent of toner
motor 3.
7401
Black developer unit non- installing
error
• The toner sensor 4 inside the black
developer unit did not output the den-
sity detection signal, judged the
engine controller PWB (A0004) the
black developer unit is not installed.
Contents
Causes
Check procedures/corrective measures
Defective toner
Replace the toner motor 2. See page 1-6-
motor 2.
50.
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Lump of toner
Replace the cyan toner container.
inside cyan toner
container or defec-
tiveness of toner
replenishment
drive system.
Defective toner
Replace the toner motor 1. See page 1-6-
motor 1.
50.
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Lump of toner
Replace the magenta toner container.
inside magenta
toner container or
defectiveness of
toner replenish-
ment drive system.
Defective toner
Replace the toner motor 3. See page 1-6-
motor 3.
50.
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Lump of toner
Replace the yellow toner container.
inside yellow toner
container or defec-
tiveness of toner
replenishment
drive system.
Defective harness
Check the damage of harness of the toner
of the toner sensor
sensor 4, check the connection of the con-
4, defective con-
nector with the black developer unit and the
nection of the con-
printer main unit, if there is trouble, remedy
nector between
or replace.
black developer
unit and the printer
main unit or poor
contact of the con-
nector terminals.
Defective toner
Replace the black developer unit. See page
sensor 4.
1-6-12.
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Defective engine
Replace the engine relay PWB (A0009).
relay PWB
(A0009).
Remarks
2F3/2F4
1-5-15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs c5030nFs-c5020nFs-c5030n

Table of Contents