Kyocera FS C5020N - Color LED Printer Service Manual page 33

1-3-4 Installing the network interface card (optional)
<Procedure>
1. Turn off printer power.
2. Remove the two screws and then remove
the optional interface slot cover.
3. Insert the network interface card into the
optional interface slot.
4. Use the two screws to secure the network
interface card.
5. Connect the network cable (IB-20 and IB-
21E).
6. Configure the network interface card. (See
the IB-2x quick configuration guide.)
Optional interface slot
Cover
Network interface cards avilable
Part number Specifications
IB-20 10 Base-TX,100 Base-TX,10 Base2
IB-21E 10 Base-TX,100 Base-TX
IB-22 Compatible to IEEE 802.11b
Figure 1-3-15
Network configuration (ex. IB-22)
Item
Wireless LAN Mode Ad hoc/802.11 Ad hoc/
Infrastruccture/Automatic
SSID Any string (up to 32 characters)
Channel Depends on the environment
Encryption DISABLE/64 bit/128 bit
(WEP)
WEP key Hexadecimal setting (00-FF)
64 bits = 10 digits, 128 bits = 26 digits
Figure 1-3-16
2F3/2F4
IB-22
Screws
Network
interface card
Screws
Remarks
Wireless LAN
Network
interface card
Network cable
Setting
1-3-11