Kyocera FS C5020N - Color LED Printer Service Manual page 64

Service manual
Hide thumbs Also See for FS C5020N - Color LED Printer:
Table of Contents

Advertisement

2F3/2F4
Code
6020
Fuser abnormal high temperature
error (heat roller)
• Abnormal high fuser temperature of
the heat roller was detected.
6030
Fuser thermistor 1 broken error (heat
roller)
• It was judged it has been broken from
the fact that it is not the input signal
from of the fuser thermistor 1 which
detects the fuser temperature of the
heat roller.
1
2
*
: 16 ppm printer, *
: 24 ppm printer
1-5-12
Contents
Causes
Check procedures/corrective measures
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Defective fuser
Replace the fuser PWB (KP-970*
PWB.
Defective power
Replace the power supply PWB. See page
supply PWB
1-6-41.
(A0004).
Defective installa-
Check the installation condition of fuser ther-
tion condition of
mistor 1,if there is trouble, remedy or
fuser thermistor 1.
replace. See page 1-6-26 or 1-6-33.
Defective engine
Replace the engine controller PWB (A0004).
controller PWB
See page 1-6-41.
(A0004).
Defective harness
Check harness of the fuser PWB (KP-970*
of the fuser PWB
A0003*
between fuser ther-
connector of the fuser PWB (KP-970*
mistor 1 or poor
A0003*
contact of the
replace.
connector
terminals.
Defective harness
Check the continuity of the harness
(S02854) between
(S02854), check the connection YC691 con-
fuer PWB and fuser
nector of the fuser PWB (KP-970*
connector or poor
if there is trouble, remedy of replace.
contact of the
connector
terminals.
Defective harness
Check the continuity of the harness
(S02853) power
(S02853), check the connection YC902 con-
supply PWB and
nector of the power supply PWB, if there is
fuser connector or
trouble, remedy or replace.
poor contact of the
connector termi-
nals.
Defective fuser
Replace the fuser PWB (KP-970*
PWB.
Defective power
Replace the power supply PWB. See page
supply PWB.
1-6-35.
Defective installa-
Check the installation condition of fuser ther-
tion condition of
mistor 1, if there is trouble, remedy or
fuser thermistor 1.
replace. See page 1-6-26 or 1-6-33.
Remarks
2
), check the conenction YC694
2
), if there is trouble, remedy or
1
2
/A0003*
).
1
/
1
/
1
2
/A0003*
),
1
2
/A0003*
).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs c5030nFs-c5020nFs-c5030n

Table of Contents