Kyocera FS C5020N - Color LED Printer Service Manual page 50

2F3/2F4
Service items
>>Paper feed
>>DEV-CLN
1-4-16
Setting the paper feed operation (printer driver priority mode)
Description
With printer driver priority mode, when selecting the specific paper feed location (a cassette or
MP tray) with the printer driver (it is not automatic selection), paper is fed from the selected
location. Message "Add Paper" is displayed when there is no paper in that location. When
selecting the MP tray as the paper feed location, paper is fed with the timing of maximum size
(A4). As for the setting media type (setting the paper type), setting of the printer driver is
notified to the engine controller PWB. Duplex printing operation is still the ordinary operation,
and paper jam occurs if paper size is different from the setting of the printer.
Purpose
To set the printer driver priority mode which priority is given to the setup of a printer driver when
the ordinary paper feed operation mode is not suitable for the usage condition of the user.
Procedure
1. Enter the service mode [>>Paper feed].
2. Press the ENTER key. Message ">>Paper feed?" will be displayed.
3. Select the mode (Special? or Normal?) pressing the p key or q key.
Special Ordinary paper feed operation mode (Default)
Normal Printer driver priority mode
4. Press the ENTER key.
Completion
Developer refreshing
De scription
The laser output of the image data for developer refreshing is carried out, and operation to
exposure, developing, and primary transfer is performed by 10 pages. (Paper is not fed)
Purpose
To perform when occurring the decrease of image density or the developing problem.
Procedure
1. Enter the service mode [>>DEV-CLN].
2. Press the ENTER key. Message ">>DEV-CLN?" will be displayed.
3. Press the ENTER key. Developer refreshing will be started.
Completion
Figure 1-4-8 Developer refreshing Image data
Description
A4 paper size
200 mm
Toner image on the primary transfer belt
33 mm