Kyocera FS C5020N - Color LED Printer Service Manual page 142

2F3/2F4
10. Confirm that the printer's power switch is set
to off.
11. Insert the memory card into the printer's
memory card slot.
12. Turn printer power on.
13. When message display (1) is displayed to
detect firmware in the memory card.
14. Message display (2) is displayed during
downloading.
15. When message display (3) is displayed to
indicate downloading is finished.
16. Turn printer power off.
17. Remove the memory card from memory
card slot.
18. Turn printer power on.
19. Confirm that message display (4) is dis-
played after warm-up.
20. Print the status page. Print the status page
to check that the firmware version has been
updated.
1-7-4
Memory card
Memory card slot
Power switch: On
Supervisor mode
(1)
Supervisor mode
(2)
CF-card reading
2F3_3000.001.021
(3)
04/04/26 [E1F9]
Machine code
2F3: 16 ppm printer
2F4: 24 ppm printer
Firmware category
1: Engine controller
3: Printer (main) controller
Supplement
Power switch: Off
Power switch: On
(4)
Ready
Memory card slot
Figure 1-7-7
Message display
Classification
Update history
build number
Release date
Year/Month/Day
Checksum
Memory card slot
Memory card
Figure 1-7-8