2F3/2F4
(3) Detaching and refitting the LED print heads relay PWB
Procedure
1. Remove the left cover (see page 1-6-4).
2. Remove the one screw.
3. Remove the two connectors and two tabs.
4. Unlatch the four latches and then remove
the LED print heads relay PWB.
5. Check or replace the LED print heads relay
PWB and then refit all the removed parts.
1-6-44
Tab
Connector
Tab
Connector
LED print heads relay PWB
Latches
Screw
Figure 1-6-66