Kyocera FS C5020N - Color LED Printer Service Manual page 132

2F3/2F4
(5) Detaching and refitting the bias high voltage PWB
Procedure
1. Remove the right cover (See page 1-6-4).
2. Unlatch the five latches and remove the two
connectors and then remove the bias high
voltage PWB.
3. Check or replace the bias high voltage PWB
and then refit all the removed parts.
1-6-46
Latch
Connector
Bias high voltage PWB
Latches
Latch
Connector
Figure 1-6-68