4. Open the stoppers of the memory socket.
5. Insert the memory so that the two notches of
the memory are engaged with the projec-
tions of the memory socket.
6. Close the stoppers of the memory socket.
7. Reattach the main controller PWB in the
printer.
8. Print a status page to check the memory
expansion.
*
If memory expansion has been properly
performed, information on the installed
memory is printed with the total memory
capacity has been increased (standard
memory capacity 128 MB).
Stopper
Memory socket
Memory
(DIMM)
Stopper
Main controller PWB
(16 ppm printer)
Main controller PWB
(24 ppm printer)
Figure 1-3-13
2F3/2F4-3.0
1-3-9