Kyocera FS C5020N - Color LED Printer Service Manual page 40

2F3/2F4-5
Service items
Paper exit position counter
Drum life counter
Primary transfer unit life counter
Developing units conuter
Color print counter
Maintenance kit counter
Optional unit software version
Drum ID
LED print head compensation value
Develper refreshing mode counter
Serial interface information
Optional paper feeder/bulk stacker instal-
lation information
Operation panel message language
Current temperature
Current humidity
Message conversion information
MAC address
Fixed asset number
Media type attributes
Memory SPD information (slot 1)
Memory SPD information (slot 2)
Calibration information 1 (CT01)
1-4-6
Items
NOTE:
Code conversion
A B
0 1
Description
/Duplexer/
/Black/Cyan/Magenta/Yellow/
-
/Black/Cyan/Magenta/Yellow/
-
-
/Paper feeder1/Paper feeder 2/Paper feeder 3/Envelope
feeder/Duplexer
/Black/Cyan/ Magenta/Yellow/
-
/Black/Cyan/Magenta/Yellow/
RS2 : RS-232C
RS4: RS-422A
First 2 bytes
Bit 0: MPF
Bit 1 to 6: Paper feeder 1 to 6
Bit 7: Duplexer
Bit 8: Reserved
Bit 9: Envelope feeder
Bit 10 to 15: Reserved
PMSG command setting (decimal)
0 to 60 °C (in 1 °C increment, "-"= Humidity/temperature sen-
sor is abnormal.)
10 to 90% RH (in 2% increment)
0: Old
1: Newly unified (GO)
-
(maximum 16 characters)
Media type setting value from 1 to 28 (fixing temperature,
paper thickness, duplex printing. See page 1-4-8.)
(14 to 20 are unused and always 0x00.)
Bus error if all digits are "E".
Bus error if all digits are "E".
/Average background S-wave/Average background P-wave/
Dark potential S-wave/Dark potential P-wave/
C D E F
2 3 4 5
Description
Second 2 bytes
Bit 0: Face-up
Bit 1: Face-down
Bit 2 to 15: Reserved
G H I J
6 7 8 9