2F3/2F4-5
1-6-7 Primary transfer section
(1) Detaching and refitting the primary transfer unit
Procedure
1. Remove the all drum units (See page 1-6-
13).
2. Pull two handles and raise.
3. Remove the primary transfer unit with the
handles.
4. Check or replace the primary transfer unit
and then refit all the removed parts.
(2) Detaching and refitting the primary transfer belt
Procedure
1.
Remove primary transfer unit (See
above).
2.
Remove the paper chute.
3.
Remove the two handles.
4.
Remove the two screws and then make
the primary transfer unit two-fold.
5.
Remove the primary transfer belt.
6.
Check or replace the primary transfer belt
and then refit all the removed parts.
1-6-22
Primary transfer unit (belt)
Paper
Handle
Handle
Primary transfer unit
Primary transfer unit
Paper chute
Handle
Handle
Handle
Figure 1-6-33 (a)
Primary transfer belt
Screw
Primary transfer unit
Screw
Figure 1-6-33 (b)
Handle