Kyocera FS C5020N - Color LED Printer Service Manual page 125

29. Remove the two screws and then remove
the exit UP guide.
30. Remove the two C-rings.
31. Remove the stopper ring and heat Z43S
gear.
Remove the two bearings.
32.
33. Remove the heat roller with bushes.
34. Remove the two bushes from heat roller.
C-ring
Stopper ring
Bearing
Screw
Bush
Heat roller
Exit UP guide
Screw
Figure 1-6-58
2F3/2F4
Bush
Bearing
Heat Z43S gear
C-ring
1-6-39