Kyocera FS C5020N - Color LED Printer Service Manual page 136

2F3/2F4
(4) Detaching and refitting the toner motor 1, 2, 3 and 4
Procedure
1. Remove the right cover (See page 1-6-4).
2. Remove the one connector.
3. Remove the hole which is inserted into the
projection of main unit frame side, slide
toner motor 4 to up in order to remove the
hook.
4. Remove the toner motor 4.
5. Check or replace the toner motor 4 and then
refit all the removed parts. (Also four toner
motors with the same procedure, there is no
order.)
1-6-50
Hooks
Hooks
Holes
(Yellow)
Projections
Figure 1-6-73
Toner motor
(Black)
Connector
Bihind view
(Cyan)
(Magenta)