2F3/2F4
2-1-5 Secondary transfer and separation section
The secondary transfer and separation section includes the secondary transfer roller which is installed on the paper feed
unit. The secondary transfer roller is applied by the bias high voltage PWB of DC bias. The image constituted by toner on
the primary transfer belt is transferred on paper by means of the difference in potential. The paper is separated from the
transfer belt as the curvature radius of the secondary transfer roller is considerably small.
2-1-24
Feed base
(Paper feed unit)
Secondary transfer roller
To
fuser unit
Feed base
(Paper feed unit)
Figure 2-1-33 Secondary transfer unit
Paper chute
Figure 2-1-32
Secondary
Transfer roller gear
transfer roller