Kyocera FS C5020N - Color LED Printer Service Manual page 119

(2) Detaching and refitting the fuser thermistor 1, fuser thermostat 1, fuser heater lamp, heat roller, and press belt
Procedure
1. Remove the fuser unit (See previous page).
2. Remove the one screw and then the termi-
nal and nut.
3. Remove the two connectors.
4. Remove the wire from wire clamp.
5. While unlatching the latch and then remove
the fuser L cover.
Terminal
Nut
Connector
Fuser L cover
Screw
Latch
Screw
Figure 1-6-48
Connector
Wire
Wire clamp
Figure 1-6-49
2F3/2F4
1-6-33