Transmit Records to Host
If you are operating in Inventory Batch Mode (see
page 3-19), you must scan the following bar code to transmit all the stored
data to the host system.
Batch Mode Transmit Delay
Sometimes when accumulated scans are sent to the host system, the
transmission of those scans is too fast for the application to process. To
program a transmit delay between accumulated scans, scan one of the fol-
lowing delays. Default = Off.
Note: In most cases, a short (250 ms (milliseconds)) delay is ideal,
however, longer delays may be programmed. Contact Technical
* Batch Mode Transmit Delay Off
Batch Mode Transmit Delay Medium
Multiple Scanner Operation
Note: Multiple Scanner Operation Mode allows you to link up to 7 scanners to
one base or Access Point. You cannot join an 8th scanner until you unlink
one of the 7 scanners or take a scanner out of range.
3 - 24
Transmit Inventory Records
14-3) for additional information.
Inventory Batch Mode
Batch Mode Transmit Delay Short
Batch Mode Transmit Delay Long