Download  Print this page

Rf Default Imaging Device - Honeywell 1900GHD-2 User Manual

Area-imaging scanner.
Hide thumbs


Y - Vertical Bar Code Offset
The vertical bar code offset allows you to offset the vertical center of the
signature capture area. Negative numbers indicate that the signature cap-
ture is above the bar code, and positive numbers indicate that the area is
below the bar code. Measurements are in multiples of the minimum bar
Example of Vertical Offset set to -7Y:
Example of Vertical Offset set to 65Y:

RF Default Imaging Device

The scanner supports imaging command processing (IMGSHP, IMGSNP, IMG-
BOX) so that EZConfig-Scanning (see page 10-3) and other applications are
able to perform imaging functions as if they were communicating directly with a
scanner. To accomplish this, the scanner uses a menu command called
RF_DID (RF Default Imaging Device). RF_DID is the name of the scanner
(BT_NAM) that is to receive imaging commands. The default for RF_DID is
"*"indicating that imaging commands are to be sent to all associated scanners.
Change this setting to RF_DID scanner_name to ensure that they are sent to a
particular scanner. Refer to
ing the port, work group, scanner name, and address for each scanner. Refer to
"Scanner Name"
on page 3-25 set a unique name for each scanner.
on page 3-9 to generate a report contain-
8 - 19


   Related Manuals for Honeywell 1900GHD-2

This manual also for:

Xwnon 1900Xwnon 1902

Comments to this Manuals

Symbols: 0
Latest comments: