Download  Print this page

Rs485 Packet Mode - Honeywell 1900GHD-2 User Manual

Area-imaging scanner.
Hide thumbs

Advertisement

Each bar code above also programs the following suffixes for each symbology:
Symbology
EAN 8
EAN 13
UPC A
UPC E
* Suffixes programmed for Code 128 with IBM 4683 Port 5B, IBM 4683 Port 9B
HHBCR-1, and IBM 4683 Port 17 Interfaces
**Suffixes programmed for Code 128 with IBM 4683 Port 9 HHBCR-2 Interface

RS485 Packet Mode

The following selection allows you to break up large bar code data into
smaller packets on an IBM POS terminal. To break up large bar codes into
small packets, scan the Packet Mode On bar code below. Scan the Packet
Mode Off bar code if you want large bar code data to be sent to the host in
a single chunk. Default = Packet Mode Off.
* Packet Mode Off
RS485 Packet Length
If you are using Packet mode, you can specify the size of the data
"packet" that is sent to the host. Scan the Packet Length bar code,
then then the packet size (from 20 - 256) from the
inside the back cover of this manual, then Save. Default = 40 .
Suffix
Symbology
0C
Code 39
16
Interleaved 2 of 5
0D
Code 128 *
0A
Code 128 **
MaxiCode
Packet Length
Suffix
00 0A 0B
00 0D 0B
00 0A 0B
00 18 0B
00 2F 0B
Packet Mode On
Programming Chart
2 - 3

Advertisement

   Related Manuals for Honeywell 1900GHD-2

This manual also for:

Xwnon 1900Xwnon 1902

Comments to this Manuals

Symbols: 0
Latest comments: