Chapter 4 - Input/Output Settings; Power Up Beeper; Beep On Bel Character - Honeywell 1900GHD-2 User Manual

4
Input/Output Settings

Power Up Beeper

The scanner can be programmed to beep when it's powered up. If you are
using a cordless system, the base can also be programmed to beep when it is
powered up. Scan the Off bar code(s) if you don't want a power up beep.
Default = Power Up Beeper On - Scanner.
Power Up Beeper Off -
Scanner
Power Up Beeper Off -
Cordless Base

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host.
If you scan the Beep on BEL On bar code below, the scanner will beep every
time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off
* Power Up Beeper On -
Scanner
Power Up Beeper On -
Cordless Base
Beep on BEL On
4 - 1