Base Power Communication Indicator; Reset Scanner; Scanning While In Base Cradle - Honeywell 1900GHD-2 User Manual

Base Power Communication Indicator

To display the power indicator on a base or an Access Point, scan the Base
Power Communication Indicator On bar code. To turn off the power indi-
cator, scan the Off bar code. Default = On .
* Base Power Communication

Reset Scanner

Scanning this bar code reboots the scanner and causes it to relink with the
base or Access Point.

Scanning While in Base Cradle

Note: This feature does not apply to the Access Point.
3 - 8
Indicator On
Reset Scanner
Base Power Communication
Indicator Off