Make sure the cables are secured in the wireways in the bottom of the
cordless base and that the base sits flat on a horizontal surface.
Plug the serial connector into the serial port on your computer.
Tighten the two screws to secure the connector to the port.
Once the scanner or cordless base has been fully connected, power
up the computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.
Connecting with RS485
A scanner or cordless base can be connected for an IBM POS terminal
Connect the appropriate interface cable to the device, then to the com-
1 - 6