Make sure the cables are secured in the wireways in the bottom of the
cordless base and that the base sits flat on a horizontal surface.
The scanner beeps.
Verify the scanner or cordless base operation by scanning a bar code
The unit defaults to a USB PC Keyboard. Refer to
For additional USB programming and technical information, refer to "USB
Application Note," available at
Connecting with Keyboard Wedge
A scanner or cordless base can be connected between the keyboard and
PC as a "keyboard wedge," where the scanner provides data output that is
similar to keyboard entries. The following is an example of a keyboard
Turn off power and disconnect the keyboard cable from the back of the
Connect the appropriate interface cable to the device and to the
in the back of this manual.
for other USB
1 - 3