Connecting With Rs485 - Honeywell 1900GSR-2 User Manual

Area-imaging scanner
Hide thumbs Also See for 1900GSR-2:
Table of Contents

Advertisement

3.
Make sure the cables are secured in the wireways in the bottom of the
cordless base and that the base sits flat on a horizontal surface.
4.
Plug the serial connector into the serial port on your computer.
Tighten the two screws to secure the connector to the port.
5.
Once the scanner or cordless base has been fully connected, power
up the computer.
This interface programs 115,200 baud, 8 data bits, no parity, and 1 stop bit.

Connecting with RS485

A scanner or cordless base can be connected for an IBM POS terminal
interface.
1.
Connect the appropriate interface cable to the device, then to the com-
puter.
Corded Scanner
RS485
Connection:
1 - 6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1900gsr-2usbXenon 1900Xenon 1902

Table of Contents