Table of Contents
Advertisement
12-1 VCR Setup Menu (Cont'd)
DISPLAYING AND SETTING VCR SETUP MENUS
C
Viewfinder
0 0 0 : SERVO / SYSTEM
1 0 0 :
V I DEO
2 0 0 : AUD I O
3 0 0 : SYSTEM
4 0 0 : T I ME CODE
5 0 0 : ON SCREEN
HM
: HOUR METER
GROUP menu screen
Counter display
2 4 4 : LOW CUT
2 4 5 : SAMP L E RATE
2 4 6 : FRONT
VOLUME
Item menu screen
DATA SET
DATA SET display
OPERATE/WARNING
LIGHT
RESET
ON
OFF
MONITOR
FILTER
SELECT
COUNTER
CTL
1 3200k
ALARM
TC
2 5600k+1/8ND
UB
3 5600k
4 5600k+1/64ND
SHUTTER
STATUS
MONITOR
MENU
CH-1
AUDIO
CH-2
LEVEL
AUTO IRIS
FULL AUTO BLACK
LOLUX
BACK L
STRETCH
NORMAL
NORMAL
SPOT L
COMPRESS
POWER
NG
ON
OFF
"MENU" indication
OF F
4 8 K
ENAB L E
CH-1
AUDIO
CH-2
LEVEL
CH-1
AUTO
MANUAL
AUDIO SELECT
AUDIO INPUT
CH-1
FRONT
REAR
LITHIUM BATT.
GROUP
HOLD
2.
1.
Engaging the VCR Setup Menu mode.
Press the MENU button.
• The "MENU" indication in the display section starts
blinking and the VCR Setup Menu appears in the
viewfinder and on the counter display.
Note:
When a cable is connected to the VTR REMOTE connector,
the VTR Setup Menu is not displayed in the viewfinder.
2.
Selecting the GROUP.
Press the GROUP button.
• Each time the GROUP button is pressed the selected
GROUP number is shown blinking on the viewfinder
screen. The counter display shows the selected group.
3.
Open the Item menu of the selected GROUP.
Press the SELECT button.
4.
Selecting the Item.
Press the ITEM button.
• Each time the ITEM button is pressed the selected item
number is shown blinking on the viewfinder screen. The
counter display shows the selected item.
5.
Changing the setting value of the item.
Press the SELECT button and select the setting value.
When multiple items should be set, repeat the operations
of steps 4. and 5.
To set menu items in other groups, press the MENU
button. When the relevant group menu is displayed,
perform the setting.
When the GROUP button is pressed, the items of the
higher order group menu are displayed.
6.
Saving the setting value.
Press the DATA SET button.
• "DATA SET" appears in the viewfinder and on the counter
display and the setting value is saved in the GY-
DV700W's memory. The display returns to the normal
screen mode when data has been saved.
If the MENU button is pressed without pressing the DATA
SET button, the display returns to the normal screen
mode without the setting value being changed.
12. SETUP MENU
TC GENERATOR
CH-2
PRESET
FREE
REGEN
REC
CH-2
CONTINUE
MENU
1.
ITEM
SELECT
DATA SET
SHIFT
ADVANCE
PRESET
6.
4.
3. 5.
67
Advertisement
Table of Contents
