3-2 Attaching the Zoom Lens (optional)
4.
1.
3
Pin
Hole
Mounting
When unplugging the cable connector, first remove the lens
itself. Then grasp this portion and pull straight out.
3-3 Attaching the Viewfinder (optional)
5.
Sliding
securing ring
Stopper
screw
3. BASIC SYSTEM CONNECTIONS AND ADJUSTMENTS
2.
1.
Mounting guide
4.
2.
Viewfinder
mount
base
3.
Connector
1.
Loosen the mount ring.
2.
Connect the cable connector.
3.
Attach the lens with its pin aligned with the hole in the mount.
4.
Tighten the mount ring.
CAUTION:
Be sure to tighten the mount ring completely. Incomplete
tightening may result in the lens dropping off or disturbed
back focus.
1.
Loosen the stopper screw.
2.
Attach the viewfinder with its guide aligned with the shoe.
3.
Connect the cable
connector as shown in
the figure on the right.
4.
Tighten the stopper screw.
5.
Tighten the ring.
VF
3
31